Free Delivery & Returns (Orders over A$300)
How to Get Oil Out of Carpet: 5 Easy Steps
• Hannah
Blot up as much oil as you can, cover the spot with bicarbonate of soda or cornflour for at least an hour, then vacuum. Work in a teaspoon of clear washing-up liquid mixed with 250 ml of warm water, blot, rinse with plain water and let it dry. Test on a hidden area first.
Key takeaways
- Blot, never rub. Rubbing pushes oil deeper and spreads the stain.
- A dry absorbent (bicarbonate of soda, cornflour or talc) does most of the work.
- Clear washing-up liquid lifts what's left. Rinse it out so the residue doesn't attract dirt.
- Test every cleaner on a hidden area, or on a spare sample, before using it on the stain.
- Wool needs lukewarm water and no bleach. Machine-washable runners can go in the wash.
How do you get oil out of carpet?
Absorb first, then wash. Most fresh spills, from olive oil to baby oil, come out with these five steps and things you already have in the kitchen.
You'll need
- Kitchen roll or a plain white cloth
- Bicarbonate of soda (baking soda) or cornflour
- Clear washing-up liquid
- A bowl of warm (not hot) water
- A spoon or blunt knife
- A vacuum cleaner
- Two clean white cloths and a dry towel
- Blot the excess. Press kitchen roll onto the spill, working from the edge inwards, and switch to a clean piece as it soaks up the oil. Scoop up thick or solid oil with a spoon first. Don't rub or scrub: it spreads the stain and roughens the pile.
- Cover with an absorbent. Pour a thick layer of bicarbonate of soda or cornflour over the whole stain, a little beyond the edges. Leave it for at least 1 hour, or overnight for a large spill, so it can draw the oil out of the fibres.
- Vacuum the powder. Vacuum slowly from several directions. If the area still looks dark or feels greasy, repeat step 2. A big spill can take two or three rounds.
- Wash with washing-up liquid. Mix 1 teaspoon of clear washing-up liquid with 250 ml of warm water. Dab it on with a white cloth, work it gently into the pile with your fingertips, then blot. Keep going with a clean part of the cloth until no more oil comes away.
- Rinse and dry. Blot with a cloth dampened in plain cool water to lift the soap, then press firmly with a dry towel. Leave it to dry fully, ideally overnight, then vacuum to lift the pile.
💡 DIY tip: On a stair runner, keep off that step until it's completely dry. A damp, soapy tread is slippery.
What works for different types of oil?
The five steps work for every household oil, but some oils need an extra step first.
| Oil | What to do first | Extra tip |
|---|---|---|
| Cooking, olive or vegetable oil | Blot quickly, then follow the 5 steps | Let hot oil from a pan cool before you touch it |
| Coconut oil | Let it set, then scrape it off with a spoon | It melts at about 24°C. Hold an ice pack in a bag on it to firm it up |
| Baby, body or hair oil | Follow the 5 steps | Fragranced or silicone oils may need two rounds of step 4 |
| Essential or diffuser oil | Blot straight away: it's concentrated and spreads fast | Open a window and keep pets away until it's cleaned up |
| Castor oil | Leave the absorbent on overnight | It's very thick, so expect to repeat steps 2 and 3 |
| Motor or black oil | Absorb, then use a solvent-based carpet spot remover made for grease | Dark pigment can stain for good. Call a professional for large spills |
| Oil paint | Don't use this method | See our guide to getting paint out of carpet |
How do you get oil out of carpet without baking soda?
Use any fine, dry powder that soaks up grease. Cornflour works just as well as bicarbonate of soda, and unscented talc or baby powder will also do the job.
If you have no powder at all, press a thick pad of kitchen roll onto the stain and weigh it down with a heavy book overnight. Then carry on from step 4. Vinegar doesn't break down grease on its own, so save it for other stains.
How do you remove old or dried oil stains?
Loosen the oil first, then clean as normal. Old oil stains look darker because the oil has trapped dirt over time.
Dab a little glycerine (sold in the baking aisle) onto the stain and leave it for about 30 minutes. Then follow steps 2 to 5, making sure you rinse well in step 5 so no glycerine is left behind. Expect two or three rounds for a stain that has been there a while.
How should you clean oil from wool, polypropylene and washable runners?
Check what your runner or rug is made from first, because it changes what's safe to use. Runrug's range includes 100% wool runners, polypropylene runners and machine-washable polyester runners, and the material is listed on every product page.
| Material | What to know | Safe to use | Avoid |
|---|---|---|---|
| Wool | Resilient, but sensitive to heat and harsh chemicals | Lukewarm water, a little mild washing-up liquid or a wool-safe cleaner, gentle blotting | Hot water, bleach, hydrogen peroxide, ammonia, scrubbing |
| Polypropylene | Shrugs off water-based spills but holds on to oil | A longer absorbent step, washing-up liquid, a solvent spot remover after a patch test | Leaving the stain to sit; high heat such as an iron |
| Washable runners (100% polyester) | Machine washable, with an anti-slip backing | Blot and absorb, pre-treat with washing-up liquid, then wash following the care label | Anything the care label rules out |
Kitchens see the most oil spills, so a machine-washable kitchen runner is a practical choice. Treat the spot, then lift it and wash it.
For hallways that see takeaway bags, bike chains and muddy boots, our washable hallway runners work the same way.
💡 Runrug tip: Test a cleaner before it touches your runner. Dab it on a hidden area, such as the end under a sofa or, on stairs, the part tucked against the riser. Better still, keep a £2.50 sample of your runner for testing. If the colour or texture changes within 10 minutes, don't use that cleaner.
When should you call a professional cleaner?
Call a professional carpet cleaner if the oil has soaked through to the underlay, if it's motor oil or another dark oil, or if a mark is still there after two full rounds.
The same goes for antique, silk or hand-knotted rugs. For everything else, the five steps above are the place to start.
Shop this guide
- Machine Washable Kitchen Runners: lift out and wash after a spill
- Kitchen Runners: made-to-measure runners for galley and open-plan kitchens
- Washable Hallway Runners: easy-care runners for busy entrances
- Samples: £2.50 each, so you can see and feel the material, and test a cleaner on it
FAQs
Does baking soda get oil out of carpet?
Yes. Bicarbonate of soda (baking soda) is one of the best things to use on fresh oil. It's a fine, dry powder that draws oil out of the fibres. Cover the stain thickly, leave it for at least an hour, then vacuum and repeat if needed. It won't remove every trace on its own, so finish with a little clear washing-up liquid and warm water, then rinse.
How do you get oil out of carpet without baking soda?
Cornflour works just as well, and unscented talc or baby powder will also do the job. Cover the stain, leave it for at least an hour and vacuum. If you have no powder, press a thick pad of kitchen roll onto the stain and weigh it down with a heavy book overnight. Then wash the area with washing-up liquid and warm water, and rinse.
How do you get old oil stains out of carpet?
Loosen the oil first. Dab a little glycerine onto the stain and leave it for about 30 minutes. Then cover it with bicarbonate of soda or cornflour, vacuum, and wash with washing-up liquid and warm water. Rinse well. Old stains often need two or three rounds. If a mark is still there after that, a professional carpet cleaner is the safest next step.
How do you get motor oil out of carpet?
Blot and absorb as much as you can with kitchen roll and a thick layer of bicarbonate of soda or cornflour. Then use a solvent-based carpet spot remover made for grease, following the label and testing it on a hidden area first. On synthetic carpet, a little isopropyl (rubbing) alcohol on a cloth can help. Motor oil carries dark pigment, so call a professional for large spills.
Can I put an oily washable runner in the washing machine?
Yes, if it's a machine-washable runner, but treat the stain first. Blot, absorb with bicarbonate of soda or cornflour, vacuum, then work a little washing-up liquid into the spot before washing. Follow the care label for temperature and drying. Check the stain has gone before you dry it, as heat can make leftover oil harder to remove.
Last reviewed 7 October 2026 by Hannah · First published 4 May 2024
Related guides
Shop this guide