posh55tech

 

Technical

Product

  • The Posh 55 range of Solid Brass door bars are a high quality product for a high quality installation.

  • The Posh 55 range are available in three lengths: 90cm, 180cm, 270cm and in nine colours, see facing page.

    Fitting

  • The Posh 55 range can be used for a carpet to carpet, carpet to hard floor and hard floor to hard floor installations.

  • The Posh 55 is screw down product and the screw heads are then hidden using the stick down inlay.

     

  • When using on a carpet to carpet installation you must still use gripper and fit the Posh 55 over the gripper to give the carpet a good grip making sure the Posh 55 is screwed down firm enough so as not to allow the screws to lift and interfere with the inlay.

    image

  • When using on carpet to hard floor fit the Posh 55 over the gripper on the carpet side and rest the other edge on the hard floor and screw down making sure the Posh 55 is screwed down firm enough so as not to allow the screws to lift and interfere with the inlay.

     

    image

    image

  • When using on hard floor to hard floor ensure a gap of 12mm between the surfaces to accommodate the underside of the fitting channel, again, screw down firmly to prevent the screws from lifting the inlay from its channel.

     

    image

  • When using on hard floor to hard floor with a height difference the Posh 55 will accommodate up to a 8mm edge, again screw down firmly to prevent the screws from lifting the inlay from its channel.

     

    Care and Maintenance

  • Satin Brass and Polished Brass Trims can be left to age (oxidise) for a natural finish. However to keep the brass like new these two finishes will need to be polished from time to time with a propriety brass polish. Ensure that you follow the instructions on the tin and protect your flooring during polishing.

  • Satin Nickel, Chrome, and Brushed Chrome These finishes will need to be polished from time to time with a propriety metal polish. Ensure that you follow the instructions on the tin and protect your flooring during polishing.

  • Pewter, Antique Bronze and Antique Brass If these finishes become contaminated the only option is to polish them with a propriety metal polish and allow them to age again naturally. Ensure that you follow the instructions on the tin and protect your flooring during polishing.

Top